wire less power - Electromagnetic radiation

wire less power - Electromagnetic radiation

Far field methods achieve longer ranges, often multiple kilometer ranges, where the distance is much greater than the diameter of the device(s). The main reason for longer ranges with radio wave and optical devices is the fact that electromagnetic radiation in the far-field can be made to match the shape of the receiving area (using high directivity antennas or well-collimated Laser Beam) thereby delivering almost all emitted power at long ranges. The maximum directivity for antennas is physically limited by diffraction.

Beamed power, size, distance, and efficiency

The size of the components may be dictated by the distance from transmitter to receiver, the wavelength and the Rayleigh criterion or diffraction limit, used in standard radio frequency antenna design, which also applies to lasers. In addition to the Rayleigh criterion Airy's diffraction limit is also frequently used to determine an approximate spot size at an arbitrary distance from the aperture.

The Rayleigh criterion dictates that any radio wave, microwave or laser beam will spread and become weaker and diffuse over distance; the larger the transmitter antenna or laser aperture compared to the wavelength of radiation, the tighter the beam and the less it will spread as a function of distance (and vice versa). Smaller antennae also suffer from excessive losses due to side lobes. However, the concept of laser aperture considerably differs from an antenna. Typically, a laser aperture much larger than the wavelength induces multi-moded radiation and mostly collimators are used before emitted radiation couples into a fiber or into space.

Ultimately, beamwidth is physically determined by diffraction due to the dish size in relation to the wavelength of the electromagnetic radiation used to make the beam. Microwave power beaming can be more efficient than lasers, and is less prone to atmospheric attenuation caused by dust or water vapor losing atmosphere to vaporize the water in contact.

Then the power levels are calculated by combining the above parameters together, and adding in the gains and losses due to the antenna characteristics and the transparency and dispersion of the medium through which the radiation passes. That process is known as calculating a link budget.

wire less power - Electrodynamic induction method

The electrodynamic induction wireless transmission technique is near field over distances up to about one-sixth of the wavelength used. Near field energy itself is non-radiative but some radiative losses do occur. In addition there are usually resistive losses. With electrodynamic induction, electric current flowing through a primary coil creates a magnetic field that acts on a secondary coil producing a current within it. Coupling must be tight in order to achieve high efficiency. As the distance from the primary is increased, more and more of the magnetic field misses the secondary. Even over a relatively short range the inductive coupling is grossly inefficient, wasting much of the transmitted energy.

This action of an electrical transformer is the simplest form of wireless power transmission. The primary and secondary circuits of a transformer are not directly connected. Energy transfer takes place through a process known as mutual induction. Principal functions are stepping the primary voltage either up or down and electrical isolation. Mobile phone and electric toothbrush battery chargers, and electrical power distribution transformers are examples of how this principle is used. Induction cookers use this method. The main drawback to this basic form of wireless transmission is short range. The receiver must be directly adjacent to the transmitter or induction unit in order to efficiently couple with it.

The application of resonance improves the situation somewhat. When resonant coupling is used the transmitter and receiver inductors are tuned to a mutual frequency and the drive current is modified from a sinusoidal to a nonsinusoidal transient waveform.Pulse power transfer occurs over multiple cycles. In this way significant power may be transmitted over a distance of up to a few times the size of the primary coil. Transmitting and receiving coils are usually single layer solenoids or flat spirals with series capacitors, which, in combination, allow the receiving element to be tuned to the transmitter frequency.

Common uses of resonance-enhanced electrodynamic induction are charging the batteries of portable devices such as laptop computers and cell phones, medical implants and electric vehicles. A localized charging technique selects the appropriate transmitting coil in a multilayer winding array structure. Resonance is used in both the wireless charging pad (the transmitter circuit) and the receiver module (embedded in the load) to maximize energy transfer efficiency. This approach is suitable for universal wireless charging pads for portable electronics such as mobile phones. It has been adopted as part of the Qi wireless charging standard.

It is also used for powering devices having no batteries, such as RFID patches and contactless smartcards, and to couple electrical energy from the primary inductor to the helical resonator of Tesla coil wireless power transmitters.

Electromagnetic waves - wireless Power Transmission

Wireless energy transfer or wireless power is the transmission of electrical energy from a power source to an electrical load without interconnecting wires. Wireless transmission is useful in cases where interconnecting wires are inconvenient, hazardous, or impossible. The problem of wireless power transmission differs from that of wireless telecommunications, such as radio. In the latter, the proportion of energy received becomes critical only if it is too low for the signal to be distinguished from the background noise.[1] With wireless power, efficiency is the more significant parameter. A large part of the energy sent out by the generating plant must arrive at the receiver or receivers to make the system economical.

The most common form of wireless power transmission is carried out using direct induction followed by resonant magnetic induction. Other methods under consideration include electromagnetic radiation in the form of microwaves or lasers

WireLess Power transmission

Wireless energy transfer or wireless power transmission (also known as the Tesla Effect) is the process that takes place in any system where electrical energy is transmitted from a power source to an electrical load, without interconnecting wires in an electrical grid. Wireless transmission is ideal in cases where instantaneous or continuous energy transfer is needed, but interconnecting wires are inconvenient, hazardous, or impossible

A circuit [A] attached to the wall socket converts the standard 60-hertz current to 10 megahertz and feeds it to the transmitting coil [B]. The oscillating current inside the transmitting coil causes the coil to emit a 10-megahertz magnetic field.At the receiving side the inductor coil receives the field and the frequency is changed to 60-hertz. like the power transmission is done wirelessly